NDA-24298 CHAPTER 4
Page 427
Issue 1
ANDD : Assignment of Name Display Data
ANDD: Assignment of Name Display Data
1. General
This command assigns user information (user’s name) onto a Station to program the Name Display - System
service feature.
2. Precautions
1. The Name Display - System service feature allows a D
term
with LCD to show the user information that
corresponds to the calling station number while it is engaged in a station-to-station call.
2. The following must be set in the ASYD command SYS1, INDEX78, b5 = 1 (Name Display service).
3. The number of digits to be assigned to the parameter NAME is determined by ASYD command, SYS1,
INDEX241, b1=0/1: 8 characters/16 characters. Multi-Line service is not available if “16 characters” is
selected.
4. This command cannot be used for Name Display - OAI service.
5. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.
3. Data Entry Instructions
TENANT
NUMBER
(TN)
STATION NUMBER
(STN)
IDENTIFYING
INFORMATION
(NAME)
8 or 16 CHARACTERS
REMARKS
Enter desired alphanumeric character.
NAME