NDA-24298 CHAPTER 4
Page 715
Issue 1
ACPEN : Assignment of Call Pickup Expand Group Data for NDM
ACPEN: Assignment of Call Pickup Expand Group Data for NDM
1. General
This command assigns the Call Pickup Expand Group data for Fusion Service. The data assigned by this
command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the
NDM at each Local Node (LN).
2. Precautions
1. Prior to this command, assignments of stations are required by the ACPGN command.
2. A maximum of 100 stations can be assigned in a Call Pickup Expand Group.
3. There is no limit to the number of Call Pickup Expand Groups.
4. The access code of the Call Pickup Expand Group is assigned by the ASPAN command SRV = SSCA,
SIDA = 63.
5. Either Call Pickup Expand Group for LDM or Call Pickup Expand Group for NDM can be executed in a
system. (Both services can’t coexist in a system.)
3. Data Entry Instructions
Note:
Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
USER GROUP NUMBER
(UGN)
TELEPHONE NUMBER
(TELN)
Max.16 digits
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
TELN
A Telephone Number of Call Pickup Group member
2
3
15
16
28
29
41
42
UGN
Fixed to 1
1