Filter
Top Products
NDA-24298 CHAPTER 4
Page 935
Issue 1
ASPAN : Assignment of Special Access Code for NDM
4. Data Sheet
(a) Service code (SRV = SSC)
Note 1:
The parameter may vary depending on the service.
Note 2:
When Split Call Forwarding is in service (the command ASYD, SYS1, INDEX79, bit2=1), this access code
is used for Split Call Forwarding.
Note 3:
When Speed Calling-System; Access is assigned, NND1 parameter assignment is also required in addition
to NND parameter.
Note 4:
Fill in the FPC in place of the parameter NND.
TENANT
NUMBER
(TN)
ACCESS CODE
(ACC)
MAXIMUM
6 DIGITS
CONNECTION
STATUS INDEX
(CI) N/H/B
KIND OF
SERVICE
(SRV)
SERVICE
FEATURE
INDEX
(SID)
1–63
NUMBER OF
NECESSARY
DIGITS
(NND) Note 1
SERVICE CONTENTS
H Hooking SSC 1 Call Hold
NNormal
SSC 2
Dial Access to Attendant
(Operator Call) Note 4
H Hooking
BBusy
SSC 3
Call Back; Entry
H Hooking
Camp on By Station
BBusy SSC 4
Executive Right of Way
NNormal
SSC 5
Call Waiting
–
Originating
BBusy
NNormal SSC 6
Call Back; Cancel
NNormal SSC 7
Call Pickup
–
Group
NNormal SSC 8
C.F.
–
All Calls/Split C.F.
–
All Calls; Entry Note 2
NNormal SSC 9
C.F.
–
All Calls/Split C.F.
–
All Calls; Cancel Note 2
NNormal SSC 10
C.F.
–
Busy Line/Split C.F.
–
Busy Line; Entry
Note 2
NNormal SSC 11
C.F.
–
Busy Line/Split C.F.
–
Busy Line; CancelNote 2
NNormal SSC 12
C.F.
–
Don’t Answer/Split
C.F.
–
Don’t Answer; Entry
Note 2
NNormal SSC 13
C.F.
–
Don’t Answer/Split
C.F.
–
Don’t Answer; Can-
cel
Note 2
NNormal SSC 14
Speed Calling
–
Station;
Entry
NNormal SSC 15
Speed Calling
–
System;
Access Note 3
NNormal SSC 16
Trunk Answer from Any
Station (TAS)
NNormal SSC 17
Individual Trunk Access
18 Not used