NDA-24298 CHAPTER 4
Page 621
Issue 1
AAEDN : Assignment of Announcement Equipment Data for NDM
AAEDN: Assignment of Announcement Equipment Data for NDM
1. General
This command assigns the connected trunk data and the condition related to Announcement Equipment. The
data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node
(NCN), updating the NDM at each Local Node (LN).
2. Precautions
The applicable Tenant Number (TN) range is designated by the ASYDN command, SYS1, INDEX8. If data in
this command is common for all tenants (ASYDN command, SYS1, INDEX800 bit7=1), assign TN parameter
as data “1” for all tenants.