Filter
Top Products
CHAPTER 4 NDA-24298
Page 562
Issue 1
ALRNN : Assignment of Logical Route and Route Class Data for NDM
71 TCMC
TCM and KP Sending Sequence
0=KP-ST 1=KP TCM-ST
2 = TCM KP-ST 3 = KP (TCM)-ST
Use this when ONSG/
INSG = 4 (MF).
72 MFSP
Sending Speed
Tone ON Tone OFF Digit/sec.
0= 68 msec. 68 msec. 7.5
1= 56 msec. 56 msec. (CCITT No.5) Note
2= 68 msec. 32 msec. 10
3= 68 msec. 36 msec. 10
4= 48 msec. 48 msec. 10
5= 52 msec. 52 msec. 10
6-15= Not used
(In case of MFC)
0 = 24.0 sec. 1 = 5.5 sec.
2 = 7.0 sec. 3 = 8.5 sec.
4 = 10.0 sec. 5 = 11.5 sec.
6 = 13.0 sec. 7 = 14.5 sec.
8 = 16.0 sec. 9 = 17.5 sec.
10 = 20.0 sec. 11 = 22.0 sec.
12 = 24.0 sec. 13 = 26.0 sec.
14 = 28.0 sec. 15 = 30.0 sec.
Note: Use this when
ONSG/INSG =
4.
73 KPST
Duration of KP sending
0 = 48 msec. 1 = 56 msec.
2 = 64 msec. 3 = 72 msec.
4 = 80 msec. 5 = 88 msec.
6 = 96 msec. 7 = 104 msec.
8 = 112 msec. 9 = 120 msec.
10 = 128 msec. 11 = 136 msec.
12 = 144 msec. 13 = 152 msec.
14 = 160 msec. 15 = 168 msec.
(In case of MFC)
0 = 12.0 sec. 1 = 5.5 sec.
2 = 7.0 sec. 3 = 8.5 sec.
4 = 10.0 sec. 5 = 11.5 sec.
6 = 13.0 sec. 7 = 14.5 sec.
8 = 16.0 sec. 9 = 17.5 sec.
10 = 20.0 sec. 11 = 22.0 sec.
12 = 24.0 sec. 13 = 26.0 sec.
14 = 28.0 sec. 15 = 30.0 sec.
When the monitor signal
is Reverse and the data is
set to “0,” KP sending is
stopped by reserve signal
monitor at the related dis-
tant office.
Note: Use this when
ONSG/INSG =
4.(MF)
LOGICAL ROUTE (LGRT) 1-899
REMARKSFUSION POINT CODE (FPC) 1-253
ROUTE NUMBER (RT) 1-255
Note