NDA-24298 CHAPTER 4
Page 293
Issue 1
AOSPN : Assignment of Outgoing Selection Pattern for NDM
AOSPN: Assignment of Outgoing Selection Pattern for NDM
1. General
This command assigns skip and additional digits information for Outgoing Selection Translation Pattern
Number (PNO) in Fusion Network. The data assigned by this command is written in the Network Data Memory
(NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
1. Before using this command, make sure that an Outgoing Selection Translation Pattern Number (PNO) has
been assigned in the ASTPN command.
2. The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTPN/AOSPN
command. Since the additional number and skip digits can be assigned by the AOPRN/AADCN command
for LCR/LCRS method, the ASTPN/AOSPN command may not be required.
3. Data Entry Instructions
Enter the PNO assigned by the ASTPN command.
PNO
NUMBER
OF
DIGITS
SKIPPED
(SKIP)
0-24
NUMBER
OF
ADDITIONAL
DIGITS
(ADD)
0-4
ADDITIONAL
DIGIT
INFORMATION
(DC)
MAXIMUM
4
DIGITS
OUTGOING
SELECTION
TRANSLATION
PATTERN
NUMBER
(PNO)
1-15
Enter the number of digits to be entered in DC parameter.
If SKIP=0, ADD must be assigned to 1-4.
ADD
SKIP DC
Enter desired skip digits if required
Enter desired additonal numbers within 4 digits.