NDA-24298 CHAPTER 4
Page 763
Issue 1
ACSIL : Assignment of Connection Service Index Data for LDM
ACSIL: Assignment of Connection Service Index Data for LDM
1. General
This command assigns the call termination for Direct-in Termination (Day and Night), Night Connection and
Remote Access to System for the Local Node (LN) in Fusion network.
2. Precautions
1. The ACFR command assignment is also required to assign the trunk incoming call termination service
feature.
2. When setting the CSI to “6” (Night Connection-Outside) or “7” (Direct-in Termination-Outside) using
this command, the ADC must be set by the ASPD command.
3. Use the ACSAL command instead of this command if Direct-in Termination (Day mode only) is required.
4. When the “PFT control by the external key” is required, the following data assignments are needed:
(a) AUNT command, TYPE = 2 (PFT)
(b) AEKD command
(c) ANCD command
(d) ACSIL command, CSI = 4 (Direct-in Termination (Night Mode))