NDA-24298 CHAPTER 4
Page 497
Issue 1
AHLS : Assignment of Hot Line Station
AHLS: Assignment of Hot Line Station
1. General
This command assigns the data related to the Hot Line service feature.
2. Precautions
1. Prior to assigning this command, the Hot Line station should be given the TEC = 14 (Hot Line class) by
the ASDT/AAST command. Additionally, TEC = 13 (Data Terminal via D
term
) and TEC = 18 (Virtual
Line Appearance) can also be applied to the Hot Line service.
2. If you want to delete the station which applied Hot Line service, delete the Hot Line data using the AHLS
command prior to deleting the station number by the ASDT/AAST command.
3. When the Hot Line destination is the outside party, assign the Abbreviation Digit Code (ADC) of the
speed calling number using the ASPD command.
3. Data Entry Instructions
1 = Station
2 = Outside party (ADC)
3 = Trunk Line
TYPE
Enter CON TN/STN data when
TYPE = 1.
CON TN / STN
Enter CON RT/TK data when
TYPE = 3 (Trunk Line).
CON RT / TK
Enter ADC when TYPE = 2 (Outside party).
The ADC should be assigned by the ASPD command.
ADC
TRUNK
NUMBER
(TK)
OPPOSITE
PARTY'S
ROUTE
NUMBER
(CON RT)
SPEED
CALLING
CODE (ADC)
MAX. 4
DIGITS
DESTINATION
STATION NUMBER
(STN)
DESTINATION
STATION'S
TENANT
NUMBER
(CON TN)
CONNECTION
TYPE
(TYPE)
1-3
HOTLINE
STATION
NUMBER
(STN)
HOTLINE
TENANT
NUMBER
(HOT TN)
Enter the tenant number of the
Hot Line station.
HOT TN