Filter
Top Products
NDA-24298 CHAPTER 4
Page 547
Issue 1
ARTDN : Assignment of Route Class Data for NDM
81 LPTM
Sender Inter-Digit Pause Index
0 = DP/1 sec., PB/0.5sec. 1 = 600 msec.
2 = 800 msec. 3 = 1000 msec.
4 = 1200 msec. 5 = 1400 msec.
6 = 1600 msec. 7 = 1800 msec.
8 = 2000 msec. 9 = 2200 msec.
10 = 2400 msec. 11 = 2600 msec.
12 = 2800 msec. 13 = 3000 msec.
14 = 3200 msec. 15 = 3400 msec.
(In case of MFC)
0 = 12.0 sec. 1 = 5.5 sec.
2 = 7.0 sec. 3 = 8.5 sec.
4 = 10.0 sec. 5 = 11.5 sec.
6 = 13.0 sec. 7 = 14.5 sec.
8 = 16.0 sec. 9 = 17.5 sec.
10 = 20.0 sec. 11 = 22.0 sec.
12 = 24.0 sec. 13 = 26.0 sec.
14 = 28.0 sec. 15 = 30.0 sec.
Note: Possible to use
when adjusting
the duration of
Pause in the
case of Speed
Calling System
or Adding
digits.
82 RSAX 0 0 0 0 Always assign data “0."
83 CST 0 0 0 0 Always assign data “0."
84 CSEG 0 0 0 0 Always assign data “0."
85 CSEU 0 0 0 0 Always assign data “0."
86 CSEL 0 0 0 0 Always assign data “0."
87 CMP 0 0 0 0 Always assign data “0."
88 TALK 0 0 0 0 Always assign data “0."
89 FOT 0 0 0 0 Always assign data “0."
90 RST 0 0 0 0 Always assign data “0."
91 TOCI
Trunk Override Calling
0 = Override Inhibited (Calling side).
1 = Tie Line Override Service is provided (Calling side).
92 TOCD
Trunk Override Called
0 = Override Inhibited (Called side).
1 = Tie Line Override Service is provided (Called side).
93 ODGD 0 0 0 0 Always assign data “0."
94 RLS 0 0 0 0 Always assign data “0."
95 GWD
Gate Way Data Service
0= Out of Service 1 = Gate Way System
2-15= Not used
96 H1
ISDN H1 Switching
0=– 1=In Service
0 0 0 0 Always assign data “0."
97 DT 0000
LGRT
1-899
FUNCTION
REMARKS
Note