NDA-24298 CHAPTER 4
Page 521
Issue 1
ARTD : Assignment of Route Class Data
15 LSG
Line Signal
0=Loop
1 = Ground Start C.O. Line
2=CDH
3 = Caller ID (Loop)
4=Loop
5=E&M Tie Line
6=DX
7=24V4
8 = Loop DID 9 - 11 = Not used
12 = Speech Line (for CCIS No. 7 or Bch of ISDN)
13 = Signal Line (for CCIS No. 7 or Dch of ISDN)
14-15 = Not used
16 SMDR2 Detailed Billing Information
See Figure 4-15 and
Table 4-20.
17 H/M
Hotel Service in CCIS No. 7
0 = Out of Service 1 = In Service
18MC 00000Always assign data “0.”
19 ANI
E911 - ANI Service
0 = Out of Service 1 = In Service
20D 00000Always assign data “0.”
21MSB 00000Always assign data “0.”
22MSW 00000Always assign data “0.”
23 TR
0=–
1 = ICPT transfer by group-II signals used.
For MPC signaling.
Table 4-20 SMDR2
CONTENTS/INPUT 0123456789101112131415
b0
0-Detailed billing is not required for incoming
calls.
××××
1-Detailed billing is required for incoming
calls.
××××
b1
0-Detailed billing is required for toll and local
outgoing calls.
×× ××
1-Detailed billing is required only for toll
outgoing calls.
×× ××
b2,3
0-
1-Metering pulses are used.
××××
2-
3-
RT
FUNCTION
REMARKS