NDA-24298 CHAPTER 4
Page 741
Issue 1
ACFS : Assignment of Call Forwarding Station Data
ACFS: Assignment of Call Forwarding Station Data
1. General
This command is used to set the Call Forwarding - All Calls/Busy Line/Don’t Answer, and further the Split Call
Forwarding Services.
2. Precautions
1. The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
2. Parameters RCV can be assigned when ASYD, SYS1, INDEX 79, b2 = 1 (Split Call Forwarding is In
Service), and data “2 (Split Call Forwarding)” is assigned at the TYPE parameter.
3. Data Entry Instructions
CALL
FORWARDING
TYPE
(TYPE)
1/2
TENANT
NUMBER
(TN)
STATION
NUMBER
(STN)
CALL
FORWARDING
KIND
(SRV)
V/B/D/N
CALL
FORWARDING
DESTINATION
NUMBER
(CFD)
RESTRICTED
CALL KIND
(RCV)
T/S
REMARKS
SRV
V = All Calls
B = Busy Line
D = Don't Answer
N = PS Incoming Incomplete
RCV
T = Trunk S = Station
CFD
CALL FORWARDING DESTINATION NUMBER.
Maximum is 24 digits.
TYPE
1 = Call Forwarding
2 = Split Call Forwarding