Filter
Top Products
NDA-24298 CHAPTER 4
Page 501
Issue 1
AHLSN : Assignment of Hot Line Station for NDM
AHLSN: Assignment of Hot Line Station for NDM
1. General
This command assigns the data related to the Hot Line service feature. The data assigned by this command is
written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each
Local Node (LN).
2. Precautions
1. Prior to assigning this command, the Hot Line station should be given the TEC = 14 (Hot Line class) using
the ASDT command. Additionally, TEC = 13 (Data Terminal via D
term
) and TEC = 18 (Virtual Line
Appearance) can also apply the Hot Line service.
2. If you want to delete the station that applied Hot Line service, delete the Hot Line data using this
command prior to deleting the station number using the ASDT command.
3. When the Hot Line destination is the outside party, assign the Abbreviation Digit Code (ADC) of the
speed calling number using the ASPD command.
3. Data Entry Instructions
TYPE
1 = Station
2 = Outside Party (ADC)
3 = Trunk Line
CON UGN
Enter CON UGN dates when TYPE = 1/2
CON LGRT/TK
Enter CON LGRT/TK data when
TYPE = 3 (Trunk Line)
HOT UGN
Fixed “1”.
CON TELN
When TYPE = 1, enter the connected
party’s telephone number.
ADC
Enter ADC when TYPE = 2 (Outside party). The ADC
should be assigned by the ASPD command.
HOTLINE
USER
GROUP
NUMBER
(HOT UGN)
HOTLINE
TELEPHONE
NUMBER
(HOT TELN)
MAX. 16 DIGITS
CONNECTION
TYPE
(TYPE)
1-3
DESTINATION
STATION’S
USRE GROUP
NUMBER
(CON UGN)
DESTINATION
TELEPHONE
NUMBER
(CON TELN)
MAX. 16 DIGITS
SPEED
CALLING
CODE
(ADC)
MAX.
4 DIGITS
OPPOSITE
PA RTY’S
LOGICAL
ROUTE
NUMBER
(CON LGRT)
TRUNK
NUMBER
(CON TK)
1
1