NDA-24298 CHAPTER 4
Page 63
Issue 1
ASYD : Assignment of System Data
14
b
0
Control of ORT all Busy Status
0/1 = ROT/Queue
b
1
Recalling method when the caller has released with Emergency
Call service
0/1 = SHF or Depressing Ground Button/Unconditional Re-
calling
Note: The operation procedure for recall is different
depending on the D
term
Series III or D
term
Series E.
D
term
III user operates with SHF.
D
term
E user operates with transfer key.
b
2
Releasing Method for Station to Station Calling Service
b
3
b
2
0 0 = Calling Party release
0 1 = Called Party release
1 0 = First Party release
1 1 = Both Party release
Normally assign “First Party release”
b
3
b
4
Temporary Class Conversion/OAI Free Location Memory
0/1 = Not Required/Required
Note: When setting outgoing restriction and toll restriction in
CCIS using the caller’s RSC transferred by a call
origination from the preceding office, data value “1” is
assigned. Destination restriction and number
restriction cannot be made using RSC. This data is
assigned “1” when the authorization code is provided.
b
5
PAD Control of 16LC circuit card (for Station to Station Calling
only)
0/1: Required/Not Required
b
6
One Burst of Ringing On Call Forwarding (C.F.) phone when
C.F. – All Calls service has been assigned (analog phones only).
0/1 = Not Required/Required
b
7
Emergency Call Printout
0/1 = No Printout/Printout
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 – 511
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT