CHAPTER 4 NDA-24298
Page 604
Issue 1
ACOC_LR : Assignment of Central Office Code – Logical Route Number
ACOC_LR: Assignment of Central Office Code – Logical Route Number
1. General
This command is used to assign C.O. line code and tie line code corresponding to particular trunks. Route
Number of the ACOC command can be assigned by using Logical Route.
2. Precautions
1. Prior to this command, logical route data must be allocated by using the ALRTN command.
2. Only when logging in to the NCN (Network Control Node), this command can be used to assign the
logical route data of self-Node and the other Nodes in the Fusion Network. If logging in to a LN (Local
Node), data setting only for the self-node is available. (Error message is indicated if you try to write the
data of other Node.)
3. The Central Office Code (COC) assigned by this command is displayed on ATTCON and also D
term
instead of the trunk number.
4. The COC assigned by this command is used to specify a trunk by the Individual Trunk Access service
feature.
5. This command affects the trunk route assigned the R/L = 1 by the ARTD command.
6. The Listed Directory Number (LDN) can be assigned as COC, and is convenient to identify the trunk.
3. Data Entry Instructions
Enter 4 digits of Central Office Code.
DC
EXTERNAL
ROUTE
NUMBER
(RT)
FUSION
POINT CODE
(FPC)
1-253
LOGICAL
ROUTE
NUMBER
(LGRT)
1-899
TRUNK
NUMBER
(TK)
1-255
DIGIT CODE
(DC)
MAX. 4 DIGITS
[0-9, *, #]
REMARKS