Filter
Top Products
NDA-24298 CHAPTER 4
Page 821
Issue 1
ACPNCN : Assignment of Calling Party Number Conversion for NDM
ACPNCN: Assignment of Calling Party Number Conversion for NDM
1. General
This command assigns skip and additional digits information for Outgoing Logical Route Number. The data
assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN),
updating the NDM at each Local Node (LN).
2. Precautions
1. When the calling party number that is more than 8 digits including the office code (ARNP, RT=0) is
received from CCIS line, the calling party number is sent as Physical Station Number through CCIS line.
Therefore, Physical Station Number must be assigned in RCPN parameter to recognize the calling party
number.
2. When the system is upgraded from non-fusion system to fusion system, Physical Station Number/
Telephone Number written in LDM programmed in ACPNCL command should be deleted and the new
Telephone Number must be assigned using ACPNCN command unless those numbers are identical with
Telephone Numbers to be written NDM (If the numbers are not deleted, the system detects the wrong
number data or does not detect the number data since the fusion system reads out the NDM data).
3. Data Entry Instruction
OUTGOING
LOGICAL
ROUTE
NUMBER
(OGLGRT)
1-899
NUMBER OF
DIGIT TO BE
SKIPPED
(SKIP)
0-24
NUMBER OF
ADDITIONAL
DIGIT CODE
(ADD)
0-24
RECEIVED CALLING
PARTY NUMBER
(RCPN)
Max. 24 digits
CALLING PARTY
NUMBER TO BE ADDED
(ACPN)
Max. 24 digits
REMARKS
RCPN
Determine the number to be recognized in the
received calling party number.
ACPN
Enter desired additional numbers to
the received calling party number
within 24 digits.
SKIP
Enter desired number of digit to be
skipped from the received calling party
number.
ADD
Enter the number of digit to be
entered in ACPN parameter.