NDA-24298 CHAPTER 4
Page 853
Issue 1
AITD_T : Assignment of ISDN Terminal Data – Telephone Number
AITD_T : Assignment of ISDN Terminal Data – Telephone Number
1. General
This command is used to assign ISDN terminal data and FID to only B1 channel. The station data of AITD
command can be assigned by using Telephone Number.
2. Precautions
1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the
ALGSL command is not available in this command.
2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in
node can be used in this command. Also, when logging in to the NCN, the data memory of the whole
nodes in the network is to be written.
3. Data Entry Instructions
FUNCTION
(FUNC)
USER
GROUP
NUMBER
(UGN)
TERMINAL
TYPE
(TYPE)
1-n
FID
PATTERN
(FIDP)
1-31
FEATURE
IDENTIFIER
DATA
(FID)
1-127
TELEPHONE NUMBER
(TELN)
Max. 16 digits
FUNC
• Terminal Information
• Feature Identifier Data (FID)
FID
This parameter is required only when
"FUNC = FID" is entered.
1
1
1
TELN
Enter the Telephone Number of the designated
station. This parameter appears when "FUNC
= Terminal Information" is selected.
TYPE
1=N-ISDN1
FIDP
Enter the FID Pattern.