NDA-24298 CHAPTER 4
Page 685
Issue 1
AUCDL : Assignment of UCD Control Data for LDM
3. Data Entry Instructions
Enter the number of calls in the UCD queue.
(This value is used for UCD Peg Count.)
QTH
Enter the number of calls in the UCD queue.
(This value is used for UCD Call Waiting Lamp on D
term
)
CWT
UCD
QUEUING
PEG COUNT
VALUE
(QTH ACT) 0/1
UCD
QUEUING
PEG COUNT
VALUE
(QTH ) 0-255
THRESHOLD
VALUE OF
CALL WAITING
(CWT)
1-255
MCI DATA
TRANSFER
(MCI)
0/1
USER
GROUP
NUMBER
(UGN)
UGN and TELN
QTH ACT
UCD queuing value (used for Peg Count) is:
0 = Invalid (QTH parameter is not assigned)
1 = Valid (QTH parameter is assigned)
MCI
The call record to the UCD group
is transferred to MCI
0 = Valid 1 = Invalid
UGN and TELN (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUL
command.
TELEPHONE
NUMBER
(TELN)
16 digits maximum