NDA-24298 CHAPTER 4
Page 729
Issue 1
ASGD_T : Assignment of Special Group Data – Telephone Number
ASGD_T : Assignment of Special Group Data – Telephone Number
1. General
This command is used to assign the stations belong to the special group which applies to Off Hook Alarm,
Priority Call, Do Not Disturb, and Room Cut Off services. The station data of ASGD can be assigned by using
Telephone Number.
2. Precautions
1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the
ALGSL command is not available in this command.
2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in
node can be used in this command. Also, when logging in to the NCN, the data memory of the whole
nodes in the network is to be written.
3. The call destination of the special group is designated by the ASID_T command.
4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.
5. Since the GN parameter is intermediate data to the ASID_T command, enter a unique number for each
special group.