CHAPTER 4 NDA-24298
Page 270
Issue 1
ARNPL : Assignment of Reverse Numbering Plan Data for LDM
ARNPL: Assignment of Reverse Numbering Plan Data for LDM
1. General
This command assigns the access code for each individual logical route in accordance with the ARTDN com-
mand.
2. Precautions
1. The ARNPL command assignment is required in either of the following cases:
(a) ASPAL/ASPAN command SRV = LCR or SRV= LCRS
(b) ARTD/ARTDN command SMDR = 1 (SMDR is provided)
2. The reversed number (ACC) assigned in this command is output to the SMDR as an access code for the
originating call.
3. The one access code can be entered to different logical routes; however, multiple access codes cannot be
entered to one logical route.
When programming the reverse numbering plan data for ISDN/CCIS, assign the B-channel/voice channel
trunk route in the LGRT parameter.
4. When programming the reverse numbering plan data for ISDN/CCIS, assign the B-channel/voice channel
trunk route in the RT parameter.