Filter
Top Products
CHAPTER 4 NDA-24298
Page 884
Issue 1
AGIP : Assignment of Default Gateway IP Address Data for LDM
AGIP: Assignment of Default Gateway IP Address Data for LDM
1. General
This command is used under FGH controlling to assign/delete the IP address allocated to FGH and IP address
of the Router dedicated to FGH.
2. Precautions
1. Enter the LENS data of FGH/IPTRK card, and the existing data is displayed by clicking “Get” button if
already assigned. If no data has allocated to the input LENS, assign the data like IP address, Net Mask,
etc.
2. It can’t be executed to modify the existing data by this command. First delete the existing data, then reas-
sign the new data.
3. Data Entry Instructions
(a) When “KIND=FGH” is selected:
KIND OF
SELECTION
(KIND)
LINE
EQUIPMENT
NUMBER
(LENS)
MG U G
FGH
FGH IP
ADDRESS
(FGH_IP)
IP
ADDRESS
FOR
DEFAULT
GATEWAY
(DG_IP)
NET
MASK
OF IP
ADDRESS
(NETMSK)
FRAME
TYPE
OF
ARP
(ARP)
VOICE
CHANNEL
CONTROL
TYPE
(CONTTYP)
QSIG-PRIME
LINK
NUMBER
(LINK_NUM)
0-32
CLIENT/SERVER
CONNECTION
MAX. NUMBER
(CSLINK_NUM)
KIND
Select “FGH”.
LENS
Enter the Line Equipment Number of the
FGH card. The existing data can be read
out by pressing the “Get” button.
CONTTYP
Select either, CLIENT
or SERVER
CSLINK_NUM
Select the maximum number of
client/server connections.
16 line (default)
4 line 8 line 16 line
24 line 32 line 64 line
Select the Frame type of ARP, when
“Detail” check box is checked.
IEEE
DIX (standard setting)
ARP
Enter the IP address of the router.
DG_IP
0-32 = QSIG Prime Link
LINK_NUM