NDA-24298 CHAPTER 4
Page 823
Issue 1
AFCP : Assignment of Call Forwarding Service by Calling Number
AFCP: Assignment of Call Forwarding Service by Calling Number
1. General
This command assigns the data related to the Calling Party Recognition Service of ISDN.
2. Precautions
1. When the Calling Forwarding Destination is a trunk line, assign the Abbreviated Digit Code for the trunk
line using the ASPD command.
2. Data can be entered on a Day/Night basis if specified in the ASYD command, SYS 1, INDEX 76, Bit 2=1.
3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
4. The CALLING PARTY parameter may be treated as:
(a) All digits (Called Station Number + Access code assigned by the DC parameter of the ACND
command + Calling party number)
(b) Some portions are ignored:
Example:
Ignore 003, where 003 is the access code.
(c) The entire number is ignored, reverting back to traditional Call Forwarding services.
5. The Calling Party Recognition Service affects when the Bearer Capability of the calling party is “Speech”
or “3.1 kHz audio.” (“Unrestricted digital data” is not available.)