CHAPTER 4 NDA-24298
Page 774
Issue 1
AAND : Assignment of Automatic Number Identification Data
AAND: Assignment of Automatic Number Identification Data
1. General
This command assigns ANI data for the number of digits of the calling station number and the office code on
each route basis for the Automatic Number Identification (ANI) Service. (For E911 ANI)
2. Precautions
The route number set in parameter RT should have been designated in ARTD, ANI = 1.
3. Data Entry Instructions
STA/ATT
OUTGOING
(AT)
0/1
MAIN/
SATELLITE
CENTRAL
(CC)
0/1
EXPAN-
SION
OF STA
NUMBER
LENGTH
(KT)
0/1
OUT-
GOING
ROUTE
NUMBER
(RT)
AT
0 = STA outgoing
1 = ATT outgoing
These parameters vary depending on
the assignment of the previous
parameter.
CENTRAL
OFFICE
CODE
(COC)
MAX.
5 DIGITS
STA
NUMBER
LENGTH
(STNL)
1-8
OFFICE
CODE
TO BE
ADDED
(ADD)
1-10
CALL
ORIGINA-
TOR DIGIT
TO BE
SKIPPED
(SKIP)
0-10
OFFICE CODE (DC)
MAX. 10 DIGITS
CC
0 = Main Central
1 = Satellite Central
KT
0 = OFF 1 = ON