Filter
Top Products
NDA-24298 CHAPTER 4
Page 887
Issue 1
AGIP : Assignment of Default Gateway IP Address Data for LDM
(c) When “KIND=IPTRK (FCCS)” is selected:
KIND OF
SELECTION
(KIND)
LINE
EQUIPMENT
NUMBER
(LENS)
MG U G
IPTRK
(FCCS)
IP ADDRESS
OF IPTRK
(IPTRKIP)
IP ADDRESS
OF DEFAULT
GATEWAY
(DG_IP)
NET MASK
OF IP
ADDRESS
(NETMSK)
QoS
CONTROL
QoS DATA
FOR SIGNAL
ROUTE
(QoS 1)
0-7/0x00-0x3F
QoS DATA
FOR SPEECH
PATH
(QoS 2)
0-7/0x00-0x3F
KIND
Select “IPTRK (FCCS)”.
LENS
Enter the Line Equipment Number of IPTRK card. The
existing data can be read out by pressing the “Get” button.
QoS CONTROL
Select the either,
IP Precedence/DiffServ
0-7: When IP Precedence is selected.
0x00-0x3F: When DiffServ is selected.
QoS 1/2
Enter the IP address of the router.
DG_IP
NETWORK
ID
(NETID)
0-15
RTP
FRAME
TYPE OF
ARP
(ARP)
CLIENT/SERVER
CONNECTION
MAX. NUMBER
(CSLINK_NUM)
CSLINK_NUM
Select the maximum number of
client/server connections.
16 line 4 line
8 line 16 line (default)
Select the Frame type of ARP, when
“Detail” check box is checked.
IEEE
DIX (standard setting)
ARP
PKTLOSS JIT_MAX JIT_MIN MNGS
JIT_
COUNT
JIT_FAST
TIME_
FAST
BASE_
COUNT
RTP
Check the “RTP” check box for detail assignment. (Usually default data “0” is set for all the parameters.)
PKGLOSS: Amount of Packet Loss [0%-100%] 0=8% (default)
JIT_MAX: Maximum Jitter Buffer [0-60 × 10ms] 0=600ms (default)
JIT_MIN: Minimum Jitter Buffer [0-60 × 10ms] 0=80ms (default)
MNGS: Interval of Jitter adjustment [0-255 times] 0=5 times (default)
JIT_COUNT: Interval of Jitter statistics [0-255 second] 0=1 second (default)
BASE_COUNT: Interval of Time-base correction [0-255 second] 0=10 second (default)
JIT_FAST: Judging rate of fast arrived packet [0-100%] 0=100% (default)
TIME_FAST: Time-base correction Judgment [0-100%] 0=50% (default)