CHAPTER 4 NDA-24298
Page 384
Issue 1
AARP : Assignment of Area Code Restriction
AARP: Assignment of Area Code Restriction
1. General
This command assigns the area/office code of Toll Restriction - 3/6 digits in conjunction with ATDP command.
2. Precautions
1. This command is used when restriction data is assigned to RES E 2 (Toll Restriction is required) in the
ARSC command or in the ARRC command.
3. Data Entry Instructions
Note:
In case the data has already been assigned when “Get” button is executed after checking “6 Digits”
parameter and entering DC E 000000, “Del” button is not valid while “Set” button is to be effective. Then
the Restriction data can be changed (overwritten) by “Set” button.
OUTGOING
ROUTE
NUMBER
(OGRT)
ROUTE
RESTRICTION
CLASS (RSC)
0-15
FLAG OF 3 OR
6 DIGITS
(FLAG)
3 Digits/6 Digits
DESTINATION
(AREA/OFFICE)
CODE (DC)
MAX. 6 DIGITS
RESTRICTION
DATA (RES) 0/1
REMARKS
FLAG
Select either 3 Digits or
6 Digits check box.
RES
0 = Area/Office code is restricted.
1 = Area/Office code is allowed.
DC should not include the access code.
DC
RSC assigned by the ARSC command.
RSC