NDA-24298 CHAPTER 4
Page 725
Issue 1
AISD_T : Assignment of Individual Speed Calling Data – Telephone Number
3. Data Entry Instructions
Note:
The existing data can be readout by pressing “Get” button after UGN and TELN data is entered.
USER
GROUP
NUMBER
(UGN)
SPEED
CALLING
DIGIT CODE
(SPD)
00-99
TELEPHONE NUMBER
(TELN)
Max. 16 digits
TELEPHONE NUMBER
(TEL)
Max. 24digits
TELN
Assign the Telephone Number designated
as a Master Station (Station Type = MST)
by the AISA/AISA_T command.
TEL
The dial number to be transmitted by the
system when a station user dial Speed
Calling – Station access code + SPD.
SPD
When assigning the parameter BLOCK=1 in the
AISA/AISA_T command, assign any data in the
range of 00-09 to this parameter.
When assigning the parameter BLOCK=2 in the
AISA/AISA_T command, assign any data in the
range of 00-19 to this parameter.