CHAPTER 4 NDA-24298
Page 758
Issue 1
ACSAL : Assignment of Connection Service Index A for LDM
ACSAL: Assignment of Connection Service Index A for LDM
1. General
This command assigns the call termination for CAS Line and Direct-in Termination (Day Only) for the Local
Node (LN) in Fusion network.
2. Precautions
1. The ACFR command assignment is also required to assign the trunk incoming call termination service
feature.
2. CAS data at the Satellite Station
(a) It is necessary to set the TEC (Telephone Class) of the CAS Line to “15” in the ASDT command.
(b) A ring-down incoming call from a C.O line is terminated to the CAS Line.
3. When assigning CSIA = 3 (Direct-in Termination-outside (Day Only)), the ADC should be assigned by
the ASPD command.
4. Use the ACSIL command instead of this command if Direct-in Termination (Day and Night Mode) or
Direct-in Termination (Night Mode) is required.
3. Data Entry Instructions
LOGICAL
ROUTE
NUMBER
(LGRT)
TRUNK
NUMBER
(TK)
CONNECTION
SERVICE
INDEX A
(CSIA)
1-7
TERMINATING STATION
ABBREVIATED
DIGIT CODE
(ADC)
MAX. 4 DIGITS
USER
GROUP
NUMBER
(UGN)
TELEPHONE
NUMBER
(TELN)
1 0 0 1 1 or 2
1
2 3 0 0 1 1
CSIA
1 = CAS Line
2 = Direct-In Termination (Day only)
3 = Direct-In Termination-Outside (Day only)
4-7 = Not used
UGN
Fixed to “1.”
ADC
Enter the abbreviated digits
assigned by the ASPD command.