NDA-24298 CHAPTER 4
Page 323
Issue 1
AADCL : Assignment of Additional Digit Translation Data for LDM
AADCL: Assignment of Additional Digit Translation Data for LDM
1. General
This command assigns additional digit information for Least Cost Routing (LCR) activating via Fusion Link.
This data is written in Local Data Memory (LDM).
2. Precautions
1. Before using this command, confirm that a Pattern Number Location (PNL) has been assigned in the
AOPRL command.
2. The applicable number of additional digit (DC) varies depending on the PNL data assigned by the
AOPRL/AUNEL command. When the AOPRL command is assigned, and additional digit is sent to out-
side of the Node, a maximum of 24 digits of DC is available. When the AUNEL command is assigned, a
maximum of 4 digits of DC is available.
3. Data Entry Instructions
Enter DC additional numbers (not including the
access code for LCR) to be applied to the transmitted
number.
DC
Enter the PNL assigned by the AOPRL command
with a range 1-999, or by the AUNEL command with
a range 1-127.
PNL
PATTERN NUMBER
LOCATION
(PNL)
1-999
ADDITIONAL DIGIT INFORMATION
(DC)
MAX. 24 DIGITS
REMARKS