NDA-24298 CHAPTER 4
Page 321
Issue 1
AADC : Assignment of Additional Digit Translation Data
AADC: Assignment of Additional Digit Translation Data
1. General
This command assigns additional digit information for Least Cost Routing (LCR).
2. Precautions
1. Before using this command, confirm that a Pattern Number Location (PNL) has been assigned in the
AOPR command.
2. The applicable number of additional digit (DC) varies depending on the PNL data assigned by the AOPR/
AUNE command. When the AOPR command is assigned, and additional digit is sent to outside of the
Node, a maximum of 4 digits of DC is available when the PNL is assigned with a range from 1 to 127, and
a maximum of 24 digits of DC is available when the PNL is assigned with a range from 128 to 999. When
the AUNE command is assigned, a maximum of 4 digits of DC is available.
3. Data Entry Instructions
Enter DC additional numbers (not including the
access code for LCR) to be applied to the transmitted
number.
DC
Enter the PNL assigned by theAOPR command with
a range 1-999, or by the AUNE command with a
range 1-127.
PNL
PATTERN NUMBER
LOCATION
(PNL)
1-999
ADDITIONAL DIGIT INFORMATION
(DC)
MAX. 24 DIGITS
REMARKS