NDA-24298 CHAPTER 4
Page 123
Issue 1
ASYD : Assignment of System Data
1160
1b
0
Hotel Feature required (Fixed Data)
(for Hotel system)
1b
1
Hotel Service kind (Fixed Data)
b
2
Length of Room Status Memory
0/1 = 8 byte/24 byte
0b
3
Pattern of Key Arrangement on Attendant
Console
(Refer to Table 4-1.) (Usually, 00)
0b
4
b
5
Guest Name Service 0/1 = Out/In Service
b
6
Numbering Plan Data Table of Guest
Station and Admin. Stations
0/1 = Separate/Common
Note 1: If data is assigned as 1, only use
commands AANP and AASP to
assign Admin. and guest
numbering plan. If data 0 is
assigned, use AANP and AASP for
Admin. numbering plan and
AGNP and AGSP for guest
numbering plan.
Note 2: If this index is changed from
separate to common, data
memory will be fragmented. To
recover the system, change this
index to separate, delete all
AGNP; then, delete all guest
stations. Reassign this index as
common and delete all AASP data
for the Admin. Reassign data as
needed.
b
7
Fixed to 0.
Note: This data is available in both
Business and Hotel applications.
Do not assign “*” or “#” as the
last digit of the feature access
code. No station may use “*” or
“#” in numbering.
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 - 511
DATA
(DATA)
00 - FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT