NDA-24298 CHAPTER 4
Page 237
Issue 1
ASPAL : Assignment of Special Access Code for LDM
ASPAL: Assignment of Special Access Code for LDM
1. General
This command determines the kind of service and the service Access Code to be executed on the Local Node
(LN) in the Fusion network.
2. Precautions
1. This command is used for the Business/Hotel (for Admin. station only) Application.
2. Use this command to assign the operator call and the priority call (terminating to ATT) in the FCCS
network.
3. Access Code for Telephone numbers may be programmed by this command, however, those Telephone
numbers are available in the self node only.
Telephone numbers available within the Fusion network are to be programmed at Network Control Node
(NCN) using the ANPDN and ASPAN commands. For more details, see NEAX2400 IPX Fusion Network
System Manual.
4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. Enter
the tenant number this command affects.
If data for this command is common for all tenants (ASYDL command, SYS1, INDEX800, bit1=1), assign
TN parameter as data “1” for all tenants.