CHAPTER 4 NDA-24298
Page 644
Issue 1
ACIC2 : Assignment of CIC Code Data 2
ACIC2: Assignment of CIC Code Data 2
1. General
This command is used for CCIS data programming, and is assigned the Circuit Identification Code (CIC) and
LENS (of the speech channel of the CCIS link) for the PC.
Note:
In this command, Determinate Point Code is synonymous with Destination Point Code; the terms are used
interchangeably.
2. Precautions
1. A unique CIC number should be given for each speech channel (which is assigned by the ATRK
command) of the CCIS link.
2. The CIC number assigned by this command must correspond to the one assigned in the direct facing node
in the CCIS network.
3. The ACIC2 command is not required for ISDN interface.
3. Data Entry Instructions
DETERMINATE POINT
CODE (PC)
1-16383
CIRCUIT
IDENTIFICATION
CODE
(CIC) 1-255
LINE EQUIPMENT
NUMBER
(LENS)
REMARKS
CIC
Assign unique CIC for all speech channel.
PC
Determinate Point Code assigned
by the ADPC/ACIC1 command.
LENS
Assign LENS of speech channel.
000 02 011