CHAPTER 4 NDA-24298
Page 670
Issue 1
ASHCN : Assignment of Station Hunting Group - Circular for NDM
ASHCN: Assignment of Station Hunting Group - Circular for NDM
1. General
This command assigns the data related to the Station Hunting - Circular for Fusion Service. The data assigned
by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating
the NDM at each Local Node (LN).
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Circular service feature related
data.
2. The maximum number of member stations within a Hunting Group is 100.
3. Data Entry Instructions
Note:
Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
USER GROUP
NUMBER (UGN)
SECRETARY TELEPHONE
NUMBER (SECRETARY TELN)
Max.16 digits
TELEPHONE NUMBER
(TELN)
Max.16 digits
TELN TELN TELN TELNNUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
STATION NUMBER (STN)
SECRETARY TELN
Enter Telephone Number of the secretary extension
if required.
Fixed to 1
UGN
1
2
3
4
400
401
402
403
26
27
28
29
51
52
53
54
76
77
78
79
CNT 1
Enter the station number specified in TELN parameter
CNT 2 - 100
4001 500
Enter the Telephone Number of the member station