CHAPTER 4 NDA-24298
Page 594
Issue 1
ATGL : Assignment of Trunk Group Busy Lamp Data
ATGL: Assignment of Trunk Group Busy Lamp Data
1. General
This command assigns the data related to the Trunk Group Busy Lamp which is accommodated on the Attendant
Console.
2. Precautions
1. The maximum number of Attendant Consoles should be assigned by the ASYD command, SYS 1,
INDEX 9.
2. The Trunk Group Busy Lamp is lit when the trunk routes specified by the RT parameter of this command
are engaged.
3. The number of Trunk Group Busy Lamps to be applied (available TGN data range) is designated by the
ASYD command, SYS1, INDEX15, bit0-3.
3. Data Entry Instructions
Attendant Console number assigned by
the ATRK command.
ATN
REMARKROUTE
NUMBER
(RT)
TRUNK
GROUP
(TGN)
1-10
ATTENDANT
NUMBER
(ATN)
Enter the route number composed of the
TGN.
RT