Filter
Top Products
NDA-24298 CHAPTER 4
Page 615
Issue 1
AAED : Assignment of Announcement Equipment Data
AAED: Assignment of Announcement Equipment Data
1. General
This command assigns the trunk information related to Announcement Equipment on a tenant basis. For the
Hotel system, it is also possible to assign Language Class when Language Service of Property Management
System (PMS) is provided.
2. Precautions
1. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If
data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit7=1), assign TN
parameter as data “1” for all tenants.
2. EQP parameter designates the kind of service feature provided by the announcement trunk.
In the Hotel system, the relationship between the EQP number and the kind of service feature can be
arranged by the AHSY command.
3. Parameter LANG appears in the Hotel system to provide “Language Service” (SYS1, INDEX 161, b2 = 1
in the ASYD command.)
4. The data “0 (Common)” of the LANG parameter means that the guest will listen the Common message
from the announcement equipment if the guest does not register the language information through PMS.
5. The R parameter specifies whether the Ring Back Tone (RBT) is provided prior to sending the message or
not.
6. When a trunk incoming call is connected to the announcement, whether the answer signal is sent out or
not is specified by the A parameter.
7. When data “0 (Single connection)” is assigned in the M parameter, the trunk number assignment (TK)
may not be required. The alternative trunk routing within a route is automatically executed.
8. When the announcement equipment is to be used as a general announcement trunk, data “0” must be
assigned for parameters C, R, A and M.
9. The route number (RT) and trunk number (TK) of the announcement trunk are assigned by the ATRK
command.