Filter
Top Products
NDA-24298 CHAPTER 4
Page 793
Issue 1
ACFO_T : Assignment of Call Forwarding Data – Telephone Number
ACFO_T : Assignment of Call Forwarding Data – Telephone Number
1. General
This command is used to assign various call forwarding service data on a tenant basis. The destinations of
forwarded calls can be the attendant console, a station, or an outside party. The station data of ACFO command
can be assigned by using Telephone Number instead.
2. Precautions
1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the
ALGSL command is not available in this command.
2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in
node can be used in this command. Also, when logging in to the NCN, the data memory of the whole
nodes in the network is to be written.
3. The parameter ADC is required only when “Night Connection Outside” is selected in “CF” parameter.
The Abbreviated Digit Codes (ADC) and the speed dial number are assigned by the ASPD command.
4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.
3. Data Entry Instructions
TENANT
NUMBER
(TN)
CALL
FORWARDING
SERVICE
(CF)
TELEPHONE NUMBER
(TELN)
Max. 16 digits
ABBREVIATE
DIGIT CODE
(ADC)
Max. 4 digits
ADC
Enter the ADC to the forwarded station
when "CF = Night Connection Outside"
is selected.
CFI
ATT: Forwarded to Attendant Console
TELN: Forwarded to Station
CF
Select the type of call forwarding service.
• Call Forwarding – Busy Line
• Call Forwarding – Don't Answer
• Call Forwarding – Intercept
• Night Connection Outside
TELN
Enter the Telephone Number of destination
station to which the call is forwarded. This
parameter appears when "TELN" is
selected in "CFI" parameter.
(CFI)
CALL FORWARDING DESTINATION
(UGN)