CHAPTER 2 NDA-24298
Page 20
Issue 1
ASSIGNMENT
12. Leave the IP Port text box blank.
13. Leave the Inter-App Resource text box blank.
14. Click Add to write the data.
15. Click Close.
Note:
The PBX Administration dialog box changes adapting to EX-FCCS Network. Enter the Fusion Group
Number (FUG) which the PBX to be logged-in belongs. “Connection Timeout”, “Response Timeout”, and
“Pacing Timer” text box is not provided. Others are the same as previous one. The PBX dialog box is as
shown below.
6.2 TCP/IP Connection
This section explains how to add or modify a PBX Alias in IPX MAT when it is connected to a PBX using
a TCP/IP connection through a Local Area Network (LAN).
Procedure Overview
1. Modify or add a PBX Alias.
2. Assign the network information in Windows.
3. Start the PBX system.
4. Log in to IPX MAT.
5. Assign the system data.
6. Set up the IPX MAT file operations for logging purposes.
PBX Administration
Add
Add
Modify
Modify
Clear
Close
PBX Alias
Connection Type
FUG
COM Port
Baud Rate
Modem Name
Phone Number
Host Name
IP Address TCP Port
TCP/IP Settings
Serial Settings
TCP/IP
bsc7200
10.41.207.207 60000
3
FPC
1
Delete
TCP-IP134