CHAPTER 4 NDA-24298
Page 388
Issue 1
AARPN : Assignment of Area Code Restriction for NDM
AARPN: Assignment of Area Code Restriction for NDM
1. General
This command assigns the area/office code of Toll Restriction - 3/6 digits for Fusion service in conjunction with
ATDPL (for LDM)/ATDPN (for NDM) command. This data is written in Network Data Memory (NDM) of the
Network Control Node (NCN).
2. Precautions
1. This command is used when restriction data is assigned to RES E 2 (Toll Restriction is required) in the
ARSCN (NDM) command or in the ARRCN command.
3. Data Entry Instructions
Note:
In case the data has already been assigned when “Get” button is executed after checking “6 Digits”
parameter and entering DC E 000000, “Del” button is not valid while “Set” button is to be effective. Then
the Restriction data can be changed (overwritten) by “Set” button.
OUTGOING
LOGICAL
ROUTE
NUMBER
(OGLGRT)
1-899
ROUTE
RESTRICTION
CLASS
(RSC)
0-15
FLAG OF 3 OR
6 DIGITS
(FLAG)
3 Digits/6 Digits
DESTINATION
(AREA/OFFICE)
CODE
(DC)
MAX. 6 DIGITS
RESTRICTION
DATA
(RES)
0/1
REMARKS
FLAG
Select either 3 Digits or
6 Digits check box.
RES
0 = Area/Office code is restricted.
1 = Area/Office code is allowed.
OGLGRT
Assign a unique LGRT No.
in the Fusion network.
DC should not include the access code.
DC
RSC assigned by the ARSCN command.
RSC