Filter
Top Products
NDA-24298 CHAPTER 4
Page 437
Issue 1
AKYD : Assignment of Key Data for Dterm
AKYD: Assignment of Key Data for D
term
1. General
This command assigns the following key data corresponding to each line/feature button on a D
term
.
• Line Key Data
• Function Key Data
• Intercom Key Data
• DSS Key Data
2. Precautions
1. The D
term
Series III (16-button type) and D
term
Series E have the default key data. (Refer to Precautions
6.) If the default data is to be used, assignment in AKYD is not necessary. Table 4-10 shows the specifica-
tion pertaining to data assignment for the D
term
.
2. Before assigning the key data for a D
term
using this command, be sure to assign the station data of the
D
term
using the ASDT command (TN, STN, TEC = 12 (D
term
)). The station number assigned by the
ASDT command is referred to as “MY LINE”.
Note:
This “MY LINE” corresponds to the physical port associated with the LENS of a ELC card.
3. By assigning another station line to a feature button using this command, an incoming call terminated to a
station line other than My Line can be answered or can be transferred to elsewhere as in the case of the My
Line. A station line other than My Line is referred to as a “Sub Line.” A “Sub Line” can be assigned not
only to a D
term
but to any conventional telephone. In addition, the station data for My Line and Sub Line
must be assigned by the ASDT command before the key data is assigned. When the Sub Line and the My
Line belong to different tenants, use the ATNR command and clear the “Tenant-to-Tenant Restriction.”
4. A Multi-Line key (the key for My Line and Sub Line) on the D
term
can be assigned as Prime Line. If the
Prime Line is not assigned, the My Line serves as the Prime Line. When the user goes off-hook, the Prime
Line is automatically selected on the D
term
.
Table 4-10 Data Assignment for the D
term
TYPE OF D
term
LINE/FEATURE BUTTON NUMBER OF BUTTONS
Series III
8-button type KYN = 1-8 8
16-button type KYN = 1-16 16
24-button type KYN = 1-24 24
Series E
8-button type KYN = 1-8 8
16-button type KYN = 1-16 16
32-button type See Figure 4-7 32