CHAPTER 4 NDA-24298
Page 204
Issue 1
ASTD : Assignment of State Translation Data
1
0 Trunk Release
0 Station (Calling Party Release)
1 Trunk Note 1
1
2
3
4
* = standard settings
Note 2: One setting applies to five items. (STM=0, STS 0)
2
0 Three-way calling with COT included
0 Restricted
1* Allowed
1
Three-way calling with COT included in Execu-
tive Right of Way service
0 Restricted
1* Allowed
2
Outgoing call to a C.O. Line or a Tie Line after
holding the COT
0 Restricted
1* Allowed
3
Outgoing call to a C.O. Line after holding a sta-
tion or a Tie Line
0 Restricted
1* Allowed
4
Processing for calling a fully-restricted station
after holding the COT
0 Restricted
1*
Allowed
Note: The call can be transferred.
5
Processing in which ATT overrides to the con-
nection between the COT and a station (Busy
Verification) and then the Busy Verification
Warning Tone is sent out periodically
0*
Warning tone is sent out to both the station and
the ATT
1
Warning tone is sent out to the station, ATT, and
C.O. side.
6
Step call when a Tie Line incoming call encoun-
ters busy
0Allowed
1 Restricted
4 0 Remote Access to PBX/Automated Attendant
0 Not provided
1* In service
6
0 DAY/NIGHT mode changeover system
0 Not used.
1* Fixed to “1”.
10*
20*
30*
Note 1:
Valid when C.O. line has a release signal.
(Standard Setting is “1”.)
Table 4-3 List for Assignment of ASTD (Continued)
STM STS
ST
* = standard settings