CHAPTER 4 NDA-24298
Page 336
Issue 1
ASDCN : Assignment of Six Digit Least Cost Routing Data for NDM
3. Data Entry Instructions
0 = PFX (Prefix)
1 = SCC (MCI, SPRINT)
KIND
Enter RA as the route advancing order
Enter the office code
RA
OFFICE
The details of this parameter are shown
below.
INPUT = Input office code can be assigned.
ALL = All office code can be assigned.
OFLG
Enter the OPR assigned
by the AFRS command
OPR
KIND OF
SELECTION
(KIND)
TIME OF DAY
CHANGE
PATTERN
NUMBER
(TDPTN) 0-7
SELECTION
PATTERN
NUMBER
(OPR)
0-4000
ROUTE
ADVANCING
ORDER
(RA)
0-7
OFFICE CODE
(OFFICE)
200-999
DESIGNATING
DATA
(EFFECT)
OFFICE CODE
FLAG (OFLG)
INPUT/ALL
Enter data “1-7” if TDPTN/PTN is assigned by the ATCP/ACMO
command, otherwise “0”. Different TDPTN data can be assigned
to a single OPR.
Enter the data (EFFECT) in the space of the corresponding office code. The meaning
of data varies depending on the KIND parameter.
· When parameter KIND is assigned as PFX:
0 = an additional digit is not required for access to an FX line.
1 = the digit “1” is required as a prefix for access to an FX line.
2 = the digit “1” is required as a prefix for access to an FX line (display only).
· When parameter KIND is assigned as SCC:
0 = the office code is not allowed for the area code dialed.
1 = the office code is allowed for the area code dialed.
TDPTN
EFFECT