NDA-24298 CHAPTER 4
Page 133
Issue 1
ASYD : Assignment of System Data
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 - 511
DATA
(DATA)
00 - FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
1
186
b
0
0/1 = Link Reconnection Not In Service/Link Reconnection In
Service
Note: An Interoffice transfer service is available. For example,
with No. 7 CCIS, a caller has called outside their own
office but is actually talking with somebody in their own
office. This bit is used to reconfigure links so they are not
wasted in call transfer service.
b
1
Restriction check based on the caller’s restriction class when the
outgoing trunk is using the No. 7 CCIS in a tandem connection.
0/1 = No Check/Check
b
2
Not used
b
3
Not used
b
4
Serial Call-Loop Release
0/1 = Out/In Service
b
5
Clearing of the buffer memory for use in the centralized
management report (for CCIS).
0/1 = Not Necessary/Necessary
b
6
CCIS or ISDN
0/1 = Out/In Service
b
7
Centralized Billing Office Code
0/1 = Ineffective/Effective
187 00
Data Bus used for CCH/DCH cards
0/1 = PM Bus/ISDN Bus