CHAPTER 4 NDA-24298
Page 682
Issue 1
AUCD : Assignment of UCD Control Data
3. Data Entry Instructions
Enter the number of calls in the UCD queue.
(This value is used for UCD Peg Count.)
QTH
Enter the number of calls in the UCD queue.
(This value is used for UCD Call Waiting Lamp on D
term
).
CWT
STATION
NUMBER
(STN)
UCD
QUEUING
PEG COUNT
VALUE
(QTH ACT) 0/1
UCD
QUEUING
PEG COUNT
VALUE
(QTH ) 0-255
THRESHOLD
VALUE OF
CALL WAITING
(CWT)
1-255
MCI DATA
TRANSFER
(MCI)
0/1
REMARKS
TENANT
NUMBER
(TN)
TN and STN
QTH ACT
UCD queuing value (used for Peg Count) is:
0 = Invalid (QTH parameter is not assigned)
1 = Valid (QTH parameter is assigned)
MCI
The call record to the UCD group
is transferred to MCI
0 = Valid 1 = Invalid
TN and STN (UCD pilot station number) parameter should be assigned with respect to the data assigned by the ASHU
command.