NDA-24298 CHAPTER 4
Page 655
Issue 1
ARTIN : Assignment of Trunk Application Data for NDM
20 DVRST Call restriction while Tie Line is backed up on
ISDN.
0 = No restriction
1 = Speech call restriction (Speech. 3.1 kHz
audio, 7 kHz audio calls are restricted)
2 = Data call restriction (Unrestricted digital,
restricted digital and Video data are
restricted.)
3 = Both Speech and Data calls are restricted.
21 RSCT Call restricted by Temporary Route Information
0 = No restriction
1 = Restriction
Note:
This data is effective when
TMPRT = 1.
22 ROCG Outgoing Call Account by Temporary Route
Information
0 = Not used 1 = Effective
Note:
This data is effective when
TMPRT = 1.
23 RICG Incoming Call Account by Temporary Route
Information
0 = Not used 1 = Effective
Note:
This data is effective when
TMPRT = 1.
24 STSENQ Status Inquiry Message Send
0 = Out of service 1 = In service
25 MMNPASS When assigning this data, always enter zero (0). 0 0 0 0
26 DLTK (Japan only)
When assigning this data, always enter zero (0).
0000
27 CALN (Japan only)
When assigning this data, always enter zero (0).
0000
28 NETINT (Japan only)
When assigning this data, always enter zero (0).
0000
29 INBAND When assigning this data, always enter zero (0).
0000
30 RETMSG (Australia only)
Return Massage for Connect ISDN LINE with
Analog Trunk
0 = CALL PROC. + ALERT
1 = CALL PROC. + ALERT or CALL PROC.
+ PROGRESS
CDN
LOGICAL ROUTE NUMBER (1-899)
TRUNK DATA