NDA-24298 CHAPTER 4
Page 649
Issue 1
ARTI : Assignment of Trunk Application Data
32 SRV
(Australia only)
Additional Service Selection
bit 0 = Advice of Charge (AOC)
0 = Valid 1 = Invalid
bit 1= Malicious Call Trace (MCT)/Malicious Call Iden-
tification (MCID)
0 = Valid 1 = Invalid
bit2-bit6 = Not used
bit7 = For TON and/or NPI
0 = Invalid 1 = Valid
Note: Input this data by a decimal.
33 TON
Type of Number
0 = Unknown
1 = International Number
2 = National Number
3 = Network Special Number
4 = Subscriber Number 5 = Not used
6 = Abbreviated Number
7 = Reserved for Extension
Note: This data is effective when ARTD, INT = 4 and
SRV bit7 = 1 is assigned.
34 NPI
Numbering Plan Identification
0 = Unknown
1 = ISDN/Telephony Numbering Plan
2=Not used
3 = Data Numbering Plan
4 = Telex Numbering Plan
5-7 = Not used
8 = National Standard Numbering Plan
9 = Private Numbering Plan
10-14 = Not used
15 = Reserved for Extension
Others = Not used
Note: This data is effective when ARTD, INT = 4 and
SRV bit7 = 1 is assigned.
35 L/T
Local/Toll (Russia only)
When assigning this data, always enter zero (0).
0000
36 ECCIS
Event Based CCIS (E-CCIS)
0 = Out of Service
1=In Service
CDN
ROUTE NUMBER
TRUNK DATA