NDA-24298 CHAPTER 4
Page 831
Issue 1
ACBC : Assignment of Call by Call Service Data
ACBC: Assignment of Call by Call Service Data
1. General
This command assigns the Call by Call Information for an ISDN Network.
2. Precautions
1. Before assigning data, assign the Outgoing Route Selection Pattern Number (OPR) using the AOPR com-
mand.
2. Table 4-28 provides the applicable data assignment for each ISDN switch.
3. The data assignment of the INTF parameter of this command should correspond to the INT parameter of
the ARTD command.
4. The data assignment of the TON parameter of this command should correspond to the one assigned by the
ARTI command.
Table 4-28 Data Assignments for ISDN Switch
ACBC
AT&T NT
Feature
Access
Service Access
(SDN)
Service Access
(MEGACOM, etc.)
Public, etc. Public, etc.
TDPTN 0 - 7 0 - 7 0 - 7 0 - 7 0 - 7
OPR 0 - 4095 0 - 4095 0 - 4095 0 - 4095 0 - 4095
RA 0 - 7 0 - 7 0 - 7 0 - 7 0 - 7
MD 0 0 0 0 0
TON 1 / 2 1 / 2 1 / 2 1 / 2 1 / 2
INTF 5 5 5 7 7
SERV 0 1 1 0 0
CODE 0 / 5 / 6 1 2 / 3 / 5 / 6 0 / 1 / 2 / 4 / 5 / 8 3
BAND - 0 - 9 - - 0 - 9
SCC 3 digits 3 digits - - -