Filter
Top Products
CHAPTER 4 NDA-24298
Page 214
Issue 1
ASPA : Assignment of Special Access Code
ASPA: Assignment of Special Access Code
1. General
This command determines the kind of service and Access Code to execute.
2. Precautions
1. This command is used for the Business Application. AASP/AGSP commands are used for Hotel
Applications.
2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. Enter
the tenant number which is affected by this command.
If data for this command is common for all tenants (ASYD command, SYS1, INDEX92, bit1 = 1), assign
the TN parameter as data “1” for all tenants.
3. The access code for C.F.-Busy Line and C.F.-Don’t answer service should be assigned by the ASYD
command, SYS1 INDEX5, bit0=0 (Same) or 1 (Separate).
4. The access code for Call Back and OG Trunk Queuing service should be assigned by the ASYD
command, SYS2, INDEX4, bit0=0 (Separate) or 1 (Same).
5. When assigning the station number, use the command ASPA to assign the access code for stations.
Note:
For the station number (ex. 3xxx)
6. The following shows the rules of NND/NND1 data for Speed Calling-System and Call Park Remote
Retrieval.
7. For the following service features, the maximum number of digits is to be assigned in the parameter NDD.
8. The variable parameter appears on the MAT depending on the data in the parameter SRV.
ANPD 1st.: 3 CI: 1 (N) & 2 (H) NND: 4
ASPA ACC: 3 CI: 1 (N) & 2 (H) SRV: 1 (STN) NND: 4
SERVICE FEATURE SRV SID NND NND1
Speed Calling-System 2 15
NND is the number of digits of
the access code (ACC)
NND1 is the number of digits
abbreviated digits code (ADC)
Call Park Remote
Retrieval Code
263
NND is the number of digits of
the access code (ACC)
SERVICE FEATURE SRV SID MAX. NND
Account Dial Code 0 41 15
Authorization Code/Forced Account Code 2 42 15
Attendant Manual Override 2 60 5