NDA-24298 CHAPTER 4
Page 433
Issue 1
ALGSL : Allocation of Telephone Station Data for LDM
ALGSL: Allocation of Telephone Station Data for LDM
1. General
This command assigns the data pertaining to the relationship between Telephone Station Number (TELN) and
the physical station.
2. Precautions
1. This Telephone Number can be used in the self (local) node only. Use the ALGSN command if the
Telephone Number for the Fusion network is required.
2. The TYPE parameter designates the programming method of the physical station. (The result is the same
whichever method is selected.) When TYPE = 1 (LENS) is selected, the physical station which
accommodates the Telephone Station Number (TELN) is specified by the LENS. When TYPE = 2 (STN)
is selected, the physical station number (STN) is used.
3. The system data assignment (ASYDL, SYS1, INDEX513 Data 01 Hex) is needed to provide the Local
Data Memory (LDM).
4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data
in this command is common for all tenants (ASYDL command, SYS 1, INDEX 800, bit0 = 1), assign TN
parameter as data “1” for all tenants.