Filter
Top Products
NDA-24298 CHAPTER 4
Page 903
Issue 1
AUIDN : Assignment of User ID data for NDM
AUIDN: Assignment of User ID data for NDM
1. General
This command is used to assign the User ID data such as user name and password for the purpose of logging in
to PBX by the MAT. Also, a remote LN is allowed to access to the NCN via the User ID data programmed in
AUIDN. Once programming the User ID data, User ID data entry is necessary to login from the next time.
2. Precautions
1. Prior to this command, NDM block is assigned at SYS1, INDEX514 in ASYDL.
2. ASCII code is available for “User Name”.
3. In case the login information is assigned in NDM data, the data is valid in the whole Fusion network. Data
assignment/deletion is activated only in the NCN (Network Control Node).
4. In Fusion Network system, User ID in both LDM and NDM data is available. When the same User ID
duplicates in LDM and NDM, only the login information in the NDM data is to be effective.
5. When assigning login information to NDM data, all the User ID in the NCN and LNs is to be checked. If
the specified User ID duplicates to the existing one, error message is indicated. If you want to use this
User ID in NDM data, it must be deleted from LDM data beforehand.
6. A maximum of 2,047 User ID data can be assigned in NDM data per a Fusion Network. In case login
information for both LDM and NDM is assigned by AUIDL and AUIDN command, maximum 2174 User
ID data (127 User IDs in LDM + 2047 User IDs in NDM) can be assigned per a Node.
3. Data Entry Instructions
PASSWORD
Enter the password two times for sure in the MAT display.
The assigned password is displayed as “
USER NAME
USER NAME
MAX. 16 DIGITS
PASSWORD
MAX. 8 DIGITS
GRADE
0
YEAR MONTH DAY
Assign the user name via
16 bytes ASCII codes
GRADE
Not used.
YEAR, MONTH, DAY
Enter the date when assigned the data
” on the MAT.