NDA-24298 CHAPTER 4
Page 749
Issue 1
ASLU1 : Assignment of Slumber Time Data 1
ASLU1: Assignment of Slumber Time Data 1
1. General
This command assigns the data related to the Slumber Time - Do Not Disturb service feature.
2. Precautions
1. The call terminating to the slumber group is forwarded to an Attendant Console or an Announcement
trunk (DAT circuit card) with a predetermined slumber time.
2. The station numbers belonging to the slumber group are assigned by the ASLU1 command.
3. The slumber time period and the forwarded destination are assigned by the ASLU2 command.
4. The G parameter on this command is intermediate data to assign the ASLU2 command.
5. Denial of the Slumber Time - Do Not Disturb service feature can be assigned by the following commands:
(a) ARTD command, SLOV = 1 is assigned for trunk route
or
(b) ASFC command SFI = 107, RES = 1 is assigned for the class of the originating station
3. Data Entry Instructions
TENANT
NUMBER
(TN)
STATION NUMBER
(STN)
SLUMBER GROUP
NUMBER
(G)
1-7
REMARKS
G
Enter data in the G parameter. Multiple numbers of STN
can be assigned to a slumber group number.
STN
Enter the station number of the
slumber group.