NDA-24298 CHAPTER 4
Page 791
Issue 1
ACFO : Assignment of Call Forwarding Data
ACFO: Assignment of Call Forwarding Data
1. General
This command assigns various call forwarding service data on a tenant basis. The destinations of forwarded calls
can be the attendant console, a station, or an outside party.
2. Precautions
1. The parameter ADC displays only when designating 4 in the CF parameter. The Abbreviated Digit Codes
(ADC) and the speed dial number are assigned by the ASPD command.
2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If
data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit1=1), assign TN
parameter as data “1” for all tenants.
3. Data Entry Instructions
NUMBER
(TN)
TENANT
REMARKS
CALL FORWARDING
SERVICE
(CF)
CALL FORWARDING
DESTINATION
AND STATION NUMBER
(CFI)
1/2
(STN)
ABBREVIATED DIGIT
CODE
(ADC)
MAX. 4 DIGITS
CFI
CF
ADC
STN
1 = Attendant Console
2 = Station
The STN parameter appears when data is
entered in the CFI parameter.
1 = C.F. - Busy Line
2 = C.F. - Don't Answer
3 = C.F. - Intercept
4 = Night Connection Outside
The parameter ADC is displayed when data "4"
is entered in the CF parameter.
1-4
1
2
3
4